Despite all of the winter rain, the Green River won’t be flooding anywhere so far in Kent.
While flood fighters from the Seattle District, U.S. Army Corps of Engineers, are providing materials and assistance in the Skagit, Nooksack and Snohomish river basins in Western Washington, there’s no work for them in the Green River basin.
But the Corps did control flow through the Howard Hanson Dam on the Green River during the heavy rains, according to a Tuesday news release. Green River inflows rose above 10,000 cfs (cubic feet per second) and Corps water managers held back over 4,000 cfs during the event’s peak.
“Public safety is our number one priority and our next concern is reducing the reservoir pools,” said Jon Moen, Western Washington senior water manager, in the release. “You’ll continue to see elevated outflows as we reduce pools to make reservoir space as we anticipate potential flooding later this week.”
The Corps’ reservoir behind Howard Hanson Dam was empty ahead of the expected storm, according to a Corps news release Jan. 31. Howard Hanson Dam is about 21 miles east of Auburn.
A flood team last week supported efforts by Diking District 12 in the Skagit basin to place rock to protect infrastructure at Strawberry Point near Burlington. Seattle District has provided sandbags and supersacks to Whatcom County and the City of Ferndale in the Nooksack basin, delivered sandbags to the city of Sultan in Snohomish County and delivered two pumps and supersacks in Skagit County along with sandbags to the city of Hamilton in the Skagit basin.
The Army Corps website describes what Howard Hanson Dam, which began operating in 1961, does to protect the Green River Valley and the cities of Auburn, Kent, Tukwila and Renton.
“The dam spans Eagle Gorge, a ravine with nearly vertical rock walls. A reservoir behind the dam collects excess runoff from 220 square miles of the 483-square-mile Green River drainage area. During winter the reservoir is kept nearly empty and the river flows through a gate-controlled tunnel at the dam’s left abutment. After storms, the tunnel gates control the flow by holding excess water in the reservoir and releasing it in quantities that stay within the capacity of the downstream channel.
Water in the reservoir is released as soon as possible to make storage space for the next storm runoff. This cycle of holding and releasing flood water is repeated as often as necessary. If an extreme flood situation should occur, water can be released over the spillway through two gates, preventing overflow of the dam. Use of the spillway has not yet been required.”
The probability of flooding greatly diminishes by March, and the dam begins its second major function – water conservation. The reservoir is allowed to fill gradually, and the water collected is used to augment low flows during summer seasons. This assures a sufficient water level for successful fish migration and spawning, while enhancing sport fishing for steelhead trout, and coho and chinook salmon on the Green River and in Puget Sound.”
The dam, however, isn’t expected to be able to handle a major rainstorm, so the King County Flood Control District has led the way to spend hundreds of millions of dollars to improve Green River levees.
The dam does not provide the protection initially thought, so there became a need for improved levees, according to the city of Kent Public Works Department.
While the dam was designed to provide 500-year flood protection, an updated study in 2012 determined it provided 140-year protection. The new levees are constructed to provide 500-year flood protection as well as better fish habitat.
Talk to us
Please share your story tips by emailing editor@kentreporter.com.
To share your opinion for publication, submit a letter through our website https://www.kentreporter.com/submit-letter/. Include your name, address and daytime phone number. (We’ll only publish your name and hometown.) Please keep letters to 300 words or less.
